(as of Sep 18,2021 07:36:38 UTC – Details)
Our first priority is creating value for our customers by offering products “Direct to You-No Middleman”, to pass on all the savings to you.
Not Your Average Hardware Store Spray Gun, It’s from a professional Manufacture.
Before First Use
NOTICE: Before first use, clean the
Spray Gun thoroughly.
If not removed, the material used for testing and corrosion prevention will contaminate paint.
CAUTION: DO NOT STOP WHEN SPRAYING.
Spraying materials will start to set and dry.as soon as they come in contact with the air.
They will cause a permanent clog if not cleared.immediately.If discontinuing spraying for more than half an hour, turn off the air supply, disconnect Cup from Gun Body and thoroughly rinse Cup and Gun Body with fresh, clean water.
Paint Preparation and Filling
Note:Proper paint mixture is essential. Follow the manufacturer’s directions. Most paints will spray easily if they are thinned properly.
1. Thread the Cup to the Gun Body and tighten until the Cup is securely in place.
2. Thin the paint according to manufacturer’s directions and mix thoroughly.
3. Carefully strain the paint through a paint strainer or a piece of cheesecloth.
You can save money by using HVLP apray gun ono material cost.
High versatility for automotive and hobby projects.
The gravity feed paint sprayer suits for almost all kinds of paint.
Adjustable fan pattern and fluid control for superior finish.
Nozzle size 0.055 in./1.4mm, cup capacity 20 oz.,working pressure 20-70PSI.